Changes between Version 30 and Version 31 of WikiStart/Documentation

Timestamp:

Oct 5, 2020, 4:25:33 PM (4 years ago)

Author:

Conchi Cárdenas Vázquez

Comment:

--

WikiStart/Documentation

@@ -32 +32 @@
 ||  || groß = fast || ~ 90 deg/min ||
 || Speeds   || mittel = medium || ~ 30 deg/min ||
-||    || fein = slow || ~  1 deg/min ||
+||    || fein = slow || ~   1 deg/min ||
 || Pointing accuracy without correction ||10-20 arcmin || 
-|| Tracking || || ||
+|| Pointing accuracy with correction || < 1 arcmin || 
+|| Tracking || 15 arcsec/sec || ||
 || Unguided observations || up to 180 s||
 
@@ -57 +58 @@
 
  * [https://svn.mpia.de/trac/gulli/king/attachment/wiki/WikiStart/Documentation/MPIA_70cm_Teleskop_4343_001.pdf MPIA_70cm_Teleskop design] A few drawings to start with giving the size scale of the hardware.
- * [https://svn.mpia.de/trac/gulli/king/attachment/wiki/WikiStart/Documentation/king70_docu_orig_intro.pdf ​ Introduction of scanned documentation (PDF, 1.5MB)] This includes instructions how to get the telescope back out of the horizon limits!
  * [https://svn.mpia.de/trac/gulli/king/attachment/wiki/WikiStart/Documentation/king70_docu_orig_overview_drawings.pdf Overview drawing from scanned documentation (PDF, 2.1MB)] Includes schematic drawings of control desk, main electric installation and motor drive principle.
  * [https://svn.mpia.de/trac/gulli/king/attachment/wiki/WikiStart/Documentation/king70_docu_orig_schematics.pdf The scanned electronics schematics (PDF, 22.5MB)] Let's hope you will never need it.
@@ -81 +81 @@
 }}}
 
-= Issues, Problems, Upgrade plans (should be moved to a ticket list one day) =
+= Upgrade plans (in the very future) =
 [[CollapsibleStart]]
 
- * have a basic operations manual, in addition to the [https://svn.mpia.de/trac/gulli/king/wiki/WikiStart/Observing#no2 FAQs]  (**in progress**)
-
- * setup SVN for KING telescope -> Ask Florian Briegel (**in progress**)
-
- * computer: finish the upgrade to the new computer.   (**in progress**)
-
- * pointing model of the telescope automatic defocus (change for each filter) pointing model is off by 15-20min
- * tracking issue (gets stuck, or jumps once in a while)
- * cleaning of the CCD surface, by flow air.
- * have a maintenance plan for camera and telescope at some point
- * have a automated dome operation
-   * requires motor encoders to know where you are
-   * the telescope uses a German mount with the azimuth axis off-centered with respect to the dome, which requires some differential tracking between telescope and dome
- * enable TRAC-blog as lab diary, by posting some basic how-to-use somewhere on these pages
- * enable NX-access / integration of ''king'' in the MPIA NX environment
- * have a webcam (on TRAC) from inside the dome, and maybe link other cams from outside
+ * Pointing model of the telescope shall be recalibrated with images with uniform distribution on the sky. A minimum of ~ 40-65 images are needed. If you want to volunteer for this task, please contact Conchi Cardenas.
+ * Automatic defocus (change for each filter. Some runs shall be perform for each filter and epoch. If you want to volunteer for this task, please contact Conchi Cardenas.
+ * Tracking issue (gets stuck, or jumps once in a while). Investigate this issue is needed too. If you want to volunteer for this task, please contact Conchi Cardenas.
+ * Maintenance plan for camera and telescope.
+ * Have a webcam (on TRAC) from inside the dome, and maybe link other cams from outside
    * since it runs 24/7, the webcam should NOT emit any light (no LEDs etc), and ideally it sends via WLAN, so we only need a power plug
 
 [[CollapsibleEnd]]
 
-= ticket administration =
+= Ticket administration =
 https://svn.mpia.de/trac/gulli/king/report